PHOTOGRAPHY TIPS AND TUTORIALS FROM HURRICANE IMAGES INC.
POWERFUL INTIMATE VIDEOGRAPHY / PHOTOGRAPHY | www.hurricaneimagesinc.com

Showing posts with label editing. Show all posts
Showing posts with label editing. Show all posts

Saturday, June 17, 2017

Do you really cut on the blink?


Celebrated film editor Walter Murch famously said that you should almost always cut on the actor’s blink; and less famously explained that you never cut on the actual blink, but sometimes before and only when it made sense for other reasons.  What I’ve never heard explained is why that technique so often works: it’s because unlike people in daily life, people on camera usually blink intentionally.
 

For actors, dialogue and physical movement are both considered actions. Script analysis reveals each character's objective, and the various actions they take to obtain their goal.  They speak in order to reach their goal, to convince another character do something.  Actors will identify the beats (or sub actions) that determined when an action is complete.  The action, for example, may be to intimidate the other person.  They'll accomplish this by probing their vulnerabilities, insinuating that harm might come to them, and escalating to a blunt threat.  Each sub-action (probe, insinuate, threaten) is a beat that makes up the action, and they'll only give up on a sub-action when it's clear their not reaching their objective.  They’ll push through each beat with 100% intensity until its done.  Then they’ll blink.  It's a divider, a rest, before they begin their next action.  The actor’s “beat,” therefore often coincide with cuts.  What this means is that you can often predict when an actor will blink just by analyzing the script for beats.  Though you'd never want to edit so blindly, you could almost edit without watching the actor at all.

Actors are trained to do analyze beats and actions (Stanislavsky is the most famous teacher of this technique), but non-actors also do a gentler version of action-blink when they know a camera is pointed their direction.  People tend to become more directed on camera.  No one wants to ramble or fumble or stare meaninglessly into space.  So they make sure there’s a reason for everything they say.  An action.

A blink is a “rest” on several levels: resting the eyes, arresting the action.  As editors, though, we often want to keep forward motion of the action, which is another reason why cutting just before the blink works.  It keeps the action moving at top pace.  What’s fascinating (and rarely seen in movies) is when an actor blinks as an action, rather than a rest.  Takeshi Kitano in Merry Christmas Mr. Lawrence is a wonderful example of that, in a film that's getting a second life of sorts.  Next time you watch a movie, look at when the actor blinks, what it means, and why the editor chose to cut or not cut.

Tuesday, January 3, 2017

180 Review: Redragon Gaming Mouse for Video Editing




Video editor controllers like the Shuttle Pro 2 and the Palette are designed to speed up your work by putting all your short cuts, macros, and controls at your fingertips.  I recently upgraded by laptop editing system, which is a vast improvement in every department except the touchpad and mouse.  The Left-Right buttons are stiff and overly specific.  Working on a budget, I decided to get the Redragon Perdition gaming mouse a go.

What I like:

  • All the controls are in my right hand.
  • 16 programmable buttons.  That’s pretty much all you need.  I can “Control + Click + Drag” all in one motion.
  • Five profiles, which means I can have one profile for my editor, a second with shortcuts programmed for After Effects, and another for daily computer use.  I don’t know what I’ll use the other two profiles for.
  • Good cheap entry into video controllers
  • Color-coded profiles help you keep track

What’s less than perfect:

  • Most of the buttons are under my thumb, which makes my forefinger tense up for control-- which sometimes results in an unplanned left-click.
  • I wish it had a second scroll wheel for scrubbing through the timeline 

What’s up for grabs:

  • I can edit more quickly and fluidly on the Redragon mouse than I can on my stiff-moused laptop, but the jury is still out on how it compares to a well-designed laptop. 

Final thoughts:
The Redragon Perdition mouse is a great entry point into the controller world, and I’ll definitely be using mine.  I’d prefer having most of the buttons on a finger keypad rather than under the thumb, so I may explore some other options after I’ve mastered this.  It’s great for learning your shortcuts and macros.


Monday, July 25, 2016

Editor in Chief - Hilton Worldwid Anniversary Video



Tim from Hilton Worldwide approached me with an unusual project.  Okay, it was unusual in several respects-- first, that an international company based outside of Los Angeles, the film and video capital of the world, would reach out to a small videocompany in Oakland; second was the nature of the video itself.  They wanted to create a 50th anniversary tribute for Greg, one of their vice presidents, utilizing cell phone video greetings from employees all across the U.S.  From the outside it wasn’t so unusual... but lift the hood and you immediately see the problems.  Multiple “videographers,” using a variety of poor equipment, in a wide range of environments, producing a breathtaking spectrum of quality. What videographer could say no?

My first goal was to try and create some consistency in the video itself.  So I created a “best practice” guide for my crew of amateur camera people.  It looked like this:

It’s impossible, of course, to turn novices into experts with just a set of guidelines.  And there were dozens of “rules” I omitted (some to my downfall... such as “no vertical videos”).  To boot, some folks roundly ignored my guide, shooting from the hip, so to speak.

Step two was a framework for the responses.  Tim and I talked about the tone of the piece, who Greg was, his outstanding achievements, and work habits.  Tim wanted something filled with humor and appreciation.  Originally, there were to be eight pairs of people on camera.  I created sets of questions (no more than 4 per person), and we divided them across geographic regions.  The number of people quickly multiplied, as did the length of the piece.  Soon, I had over an hour of footage from 25+ individuals.  Audio levels ranged from barely audible to loudspeaker, and background noise from air conditioner hum to convention floor.  

The trick, then, was to construct as much “story” as possible among the different speakers.  I divided the video into topic sections, and focused my edits along common themes, letting multiple people tell the same story whenever possible.  No one was ever under the illusion that this was going to be a polished “showroom” piece.  But Hilton was thrilled with the final result; the rough edges were authentic and heartfelt rather than glossy.  The sentiment was exactly what they wanted to convey to Greg, and the “tone” said “Hilton.”




Monday, May 25, 2015

Making Your Favorite Lightroom Presets Easy to Find


Editing images  on a laptop has its drawbacks.  One of them is lack of screen space, which makes scrolling through Lightroom presets a pain.  I'm not a fan of presets.  I believe each image should be uniquely edited, and that you should be able to easily duplicate the look of any preset you own.  After all, presets don't import any new functionality to Lightroom, they adjust the sliders already in front of you.  But there are times when presets give me an opportunity to see wildly different versions of my images to spur my imagination.  The problem is that out of the 80 or so presets loaded on my computer, there are really only 10 or so that are interesting.  And they are a devil to find in the menus on a small-ish screen.  I always wanted a feature where you could rate and filter your presets.  Lightroom doesn't offer it, but there is another solution.

You can create a "Favorite" preset folder for your most commonly used presets.  The easiest way to do this is to copy them over from their original location.  Lightroom makes this easy with the ability to right-click on a preset and select "Show in Explorer." This takes you to the preset in it's original folder.


Copy you desired preset, go up to the next folder level (Develop Presets) create a Favorites folder, and paste in the preset. In Lightroom, the presets folders are listed alphabetically.  I labeled my folder "A Favorites" so it would be on the top of the preset list for easy access.  If you have a lot of presets, it will save you a lot of time.

Monday, April 20, 2015

Get Punchy

One of my major annoyances is washed out photos.  As a portrait photographer, this is most likely to happen on bright days, the sunlight causing refraction in my lens.  Or worse, when I've over-exposed and there's just not enough data for strong contrast.  On the images below, I kinda had both things going on....  Here's a fast technique for getting the punch back.




Here's the Before and After.  The technique is simple: in Photoshop (or Lightroom) work the image to produce the best exposure and contrast possible without torturing the pixels too much. Then create a Black and White Layer in Photoshop.  Set that layer to "Soft Light" and then adjust the Layer Opacity to taste.  For more control, paint in your mask on the B&W layer as I've done.


The "punch" created by this technique tends to be a little "crunchy"-- it can push skin tones towards porcelain white and etch wrinkles-- so it's really a matter of adjusting to taste.

Monday, August 18, 2014

Day 80, Learning 80: Answering the Tough Question




When I shoot a session I try to take as few pictures as possible.  My primary reason is thus:  in taking fewer, more conscientious photos I improve my skill set.  Each image is thought-out, then problem solved.  The better I get, the fewer “mistakes” I make, and the more likely I’ll be able to produce a great image under pressure with no opportunity for a re-take (such as during a wedding).  Also, I spend less time frowning at the back of my camera (which can make clients uncomfortable) and I have greater ability to show them an image on the back of my camera if I think they need a little encouragement.

I also try to limit the number of images I provide a client as much as (reasonably) possible.  I have two reasons for this:  first, I don’t what to suffocate truly great images under simply “good” ones; and second I want my client to view the images as a piece of art.  You don’t buy paintings by the dozens; why should you buy photos that way? 

This means, however, that I am often asked for the “other” photos I took.  The client, understandably, feels the because they paid for a session they are entitled to all of the photos, edited or not.  There are a number of reasons I don’t want turn over un-edited images.  First, there’s my reputation to consider.  I don’t want to be represented by my worst images unless it’s absolutely required of the assignment.  Second, when the client compares a non-edited image to a similar edited ones, they’ll begin to see beneath my work.  If I’ve removed a skin blemish (and I outline my rules for doing so here), they may begin to feel badly about the fact that they had a skin blemish.  And I don’t ever want my clients feeling badly about a session.

It’s some trial and error to figure out what to say when someone asks for those “other” images.  What I tell them is this:  "Back in the film days, photographers typically only took about 250 images, and maybe 150 of those were worth sharing with the bride and groom.  With digital we can shoot 1000 images for almost no cost (it does tax the shutter mechanism which has a limited lifespan), but in truth most of those 750 additional images are the photographer practicing in the moment.  We’re trying different compositions, different depths of field, different exposures, or trying to find the moment that best captures the emotion. A musician practices in their living room and performs in front of an audience when the work is as near perfect as they can manage.  A photographer can’t practice before the event, so we have to combine practice and performance during the event.  The real performance, however, is when we share our near-perfect images with others."

If I still get push-back, I may talk about my criteria for selecting the best images, the problems of RAW files, or even the problems with un-edited, un-curated images in general: they went with a professional photographer because they wanted to be happy with the images, but everyone looks bad in some photos because humans are capable of making some pretty strange faces.

So when I say I try to provide as few images as possible to my clients, what does that mean?  For a private session I am for approximately 40 finished images.  Events can vary greatly, too much to define. It has been as few as 40 and as many as 300.  Weddings I say 150-200 to my client; I provide 200-225.  The commercial world is completely different.  Often, those clients want just 5-10 strong choices.


Friday, August 15, 2014

Day 79, Learning 79: Maximizing Sharpness and Detail




These days we probably place too much emphasis on sharpness and detail; the masters of old certainly weren’t as obsessed with it as we.  Even while I try to remind myself that sharpness isn’t everything, I find myself justifying my obsession by saying I can always unsharpen an image, but it’s harder to sharpen a blurry one.

True sharpness is a cross-platform endeavor

I’ve known the basics of how to achieve sharp images for years, decades; but as a professional I’ve learned the importance of maximizing sharpness in a very conscious way across “platforms.”  Sharpness isn’t dependent solely upon your equipment, your focus, your camera settings, or your editing skills-- it’s a combination of all four.  So today I’m covering them all.

Equipment / Lens.  Manufacturers tout the sharpness of their lenses, and it’s a vital player in the game.  Without a sharp lens you’ll never get truly sharp, detailed pictures.  In truth, though, most lenses are pretty sharp nowadays-- or at least pretty sharp at a specified focal length and/or aperture.  Inexpensive lenses can often be as sharp as expensive ones.  No matter what you buy, it’s worth researching what others have written about the “sweet spot” for sharpness.  Typically, though, lenses don’t perform at their best near the edges of their capacity.  They tend to be sharpest between f/5.6 and f/16, and if it’s a zoom at neither the widest or the narrowest.  A few test shots will probably tell you what you need to know.

Equipment / Lens Hood.  This five dollar accessory (I use this collapsible version) can make a world of difference, even when you’re not shooting with the sun pointing into the lens.  We see objects in the world because light is reflecting-- and refracting-- off of them.  We are literally walking in a world of refracted light.  Strong, directional light on a clear day causes the light to refract before it reaches your sensor, and blurs your image.

Focus.  There’s not too much to say about this.  Your camera’s auto-focus probably does a pretty stellar job.  Certain lens-camera combinations can require fine-tuning, an option available on high-end DSLRs.  Another factor to consider is the where to focus.  In portraits, the closest eye is the common target and for good reason.  If the eyes are sharp, then the image appears in “focus” even if the rest is blurry.  This dynamic comes into play when saving a slightly blurry image during image editing.

Settings / Aperture.  Only a few lenses are tack sharp wide open.  Strangely, these lenses aren’t necessarily the most expensive ones.  The Nikon 75-150mm f/3.5 is very sharp wide open and costs $150 used.  Typically, however, you need to close your aperture two stops before you get close to maximum sharpness.  For most lenses, sharpness declines around f/18 due to diffraction.  “Diffracted light” is light that is reflected at an angle after striking a surface.  When you narrow the diameter of the aperture, you are essentially forcing the light through a narrow opening and a small portion of that light is bouncing.  A wave length that should fill one pixel of your sensor spills onto another, muddying the sharpness of your image.  Most lenses, therefore, are sharpest between f/5.6 and f/16.

Settings / Shutter.  This is a no-brainer.  A slow shutter speed allows the tremor in your hands-- or the movement of the subject-- to blur the image.  The common rule of thumb is your shutter setting should be equal or greater than the millimeter of your lens: 50mm lens, 50th of a second.  This is (basically) true for a full-sized sensor, but the rule deteriorates quickly.  The higher the MP on your sensor, the higher the shutter speed needs to be (Nikon D800 owners discovered this in a hurry).  The real villain is pixel density-- not the number of pixels overall. The closer those pixels are to each other, the more they are affected by motion blur and diffraction.

Settings / ISO.  High ISO equals noise.  Noise competes with detail.  Yes you can reduce noise in post, but you’re also reducing the natural texture.  So if we want sharper images, shoot as close as possible to your camera’s base ISO (typically 100 or 200) and with proper shutter speed and aperture.

Editing.  There are a number of sharpening tools in a variety of software editing programs and they all adjust essentially the same thing.  What’s surprising is that they can be remarkably different in terms of effectiveness.  It’s important to understand that sharpening tools essentially increases the contrast on perceived “edges” in the image (any place there is a sharp change in color).  Lightroom’s sharpening tool works well with non-portrait images; I find it to be ugly on people.  Photoshop offers a quick sharpen tool (the triangle tool) for when the image is pretty sharp but I want to quickly hit the eyes or hair. 

I typically set the Strength between 15 and 25 to minimize noise.  More sophisticated options are the UnSharp Mask and Smart Sharpen filters.  These adjust the edge contrast and are best used with a Mask so you can paint the sharpness exactly where you want it.  The most powerful tool in my opinion, is the High Pass Filter located under “Other” in the Filter menu.  For portraits I recommend setting the Radius between 2.5 and 3.5 (though you may need to go higher based upon the image), and the Blend Mode for the layer to Overlay.  Then apply a black Mask (holding the Alt key while clicking on the mask icon) and paint in the areas of sharpness.  In my experience, the high pass filter can virtually adjust the plane of focus by as much as two millimeters if I’ve missed my focus. The eyes, as I mentioned earlier, define our sense of focus in a portrait.

Not every image needs to be in sharp focus; that’s a myth sold to us by camera and lens makers.  It’s reinforced by the fact we view images on our computers now.  What used to be a 4x6 inch image now starts at 5x7 with infinite zoom capabilities.  Most people, however, still print at 4x6.  When I pick up my camera, I’m aware that sharpness is an aesthetic variable just like depth of field and I plan accordingly.  Often I default to a “sharper is better” decision because I can always blur in post, but even then the degree to which I pursue sharpness varies.  The picture below was one of my client’s favorites (and mine, too).  I clearly missed my focus mark.  But that error adds an ethereal quality to the image, and an intimacy that wouldn’t exist if the eyelashes had been in focus.  



What’s your favorite “fuzzy” image?

Wednesday, June 11, 2014

Day 74, Learning 74: Playing with Shadows


There are a number of techniques for isolating and manipulating just the shadow-- or under exposed-- areas of your image. This one is a favorite, because it you have complete control over the area and the ability to work with any number of tools.

I like the low-key quality of the image above, but her black hair disappears against the black drop.  I could have added more rim light, but that wouldn't have teased out the texture very well.  Or I could have increased the front light, but then I would have lost the moodiness of the low-key.  If I had really wanted to be finicky during the shoot, I could have added a front hair light, and lowered the more general light on her face to compensate.  If you remember your light theory, you'll recall that light is additive.  But this wasn't an advertising shoot-- I didn't have half an hour to fiddle with one shot. So what can I do in post?

First-- as always-- duplicate your layer.
Second-- you need to select just the shadow areas.  If you press Ctrl + alt + 2 on your keyboard, you'll select just the bright areas.  On older versions of Photoshop I believe it's Ctrl + alt + ~ but they changed this shortcut more than once.  If neither of those work for you, google that command with your version of Photoshop.  This will select the highlights as shown below.


 The great thing about this command is that the brighter the pixel, the more it's selected.  In other words, it's a gradation.

Third-- reverse (or inverse) the selection:


Fourth:  Hit "Q" and you'll see your selection mask in red.  The great thing about this tool is that you can use your paint brush to modify the selection.  Because I'm removing areas from the selection, I'll use the brush with Black paint.

 I want to make sure her skin tones and the richness of the black background remain unaffected, so I painted over them, turning the masked (unaffected) area dark red.


 Hit "Q" again (I often forget this step) and you'll see the new selected area; the selected portion is still a gradation: the darker the pixel, the more it will affected by our next adjustment.

Fifth:  Duplicate the layer using Ctrl J.  Now you have a new layer of just the shadow area you want to manipulate.  You can use Levels, or any other approach.  Here I did something even simpler: I changed the Blend Mode to Screen, brightening everything dramatically.

 Now you can compare the original image to the final.  Suddenly we can see texture in the front  of her hair.  We haven't lost the tonal quality of the shadow on her cheek, which was the goal.


Friday, May 9, 2014

Day 67, Learning 67: Tether Me Up


Shooting tethered is bound to be a love/hate relationship.  Seeing the results immediately on full sized screen can be both gratifying and helpful, allowing you to make adjustments in real time and save hours of headache in post.  Of course, some of that headache may be transferred to the shoot itself if the tether keeps you from moving fluidly, or if your computer buffer makes you wait for several minutes to view the burst of images you just snapped.

One of its most useful applications is when collaborating with an art director.  In my last post I shared some images and insights from a food shoot I did for Yum for All.  Katherine Crowley, the baker, and I worked together during the afternoon.  Food photography is meticulous work; there's no need for a burst of snapshots; in addition, the visual geometry, angles, and subtlety of lighting are of utmost importance.  This makes food photography the perfect session to tether up.

Now it's time for a confession. I'm still using Lightroom 3.  Yes, I know I should upgrade and that it's not that expensive.  But being a combined Lightroom/Photoshop user, and advantages of upgrading are relatively few.  However, I shoot a Nikon D600 which isn't supported in LR3.  So how did I manage it?

There's a trick in Lightroom that allows you to tether any camera into LR:  if you use a different tethering program, you can "monitor" an existing folder and automatically bring the new images into LR. You can set it up under:  FILE, AUTO IMPORT, AUTO IMPORT SETTINGS.  The tricky bit is that the folder has to both exist and be empty when you create the settings.  For the cookie shoot I used ControlMyNikon software to tether the camera, and auto imported into Lightroom.  If I only wanted to see the image I could have skipped Lightroom, but Katherine and I tweaked the images to bring out their potential as we worked.  This informed whether we needed to re-shoot or move on.

ControlMyNikon is very inexpensive and feature rich.  Another free option is DigiCamControl.  Check them out and see what works best for you.

I arrived at my cookie shoot without my USB extension cord.  Don't do that.  My recommendation is a 10-foot extension cord for about 7$.  Then you can use varying lengths of USB cable based on the project.

One of the shortcomings of Lightroom as a monitor is that the interface is cluttered with menus all around.  There's a shortcut that solves that problem, though:  hit "L" once and everything but the image will dim; hit "L" a second time and everything will go black around the image.  You can still use the arrow keys to move between images.  Hit "L" a third time and everything returns.

With product photography I would always recommend going tethered.  It saves time and keeps you from unnecessarily duplicating images for the sake of "safeties."  With people-as-product shoots (commercial photography) I would always consider tethering, especially if you're indoors.  There is so much information that your LCD doesn't provide.  And it slows you down, which is really a good thing.

Saturday, January 25, 2014

Day 13, Learning 13: Dodge and Burn with a color base in Lightroom


One of my biggest pet peeves with dodging and burning techniques is that it can may make your image look muddy and gray if you have a large area to address (say, lightening an eye shadow or darkening an over-exposed forehead).  But you can tint your adjustment brush with whatever color your desire.  Even better, there’s a trick for picking the precise color from anywhere on the picture... in fact, from anywhere on your computer screen.
  1. Select the Adjustment brush
  2. Click on the color box beneath the sharpness slider
  3. Click anywhere in the color picker box
  4. Then hold and drag to the point on your screen you want to sample.  It will same that color.

This isn’t the best technique for working with people/portraits, but it works great with landscapes and other images.

The color picker tool also works with the Graduated Filter. 

Saturday, January 18, 2014

Day Six, Learning Six: Dodge/Burn on 50% Gray


In portraits this technique can be used to reduce unwanted shadows, or deepen them for a more dramatic look.  In landscape and architectural photography it can create more dramatic, dynamic images.  There are several different ways to Dodge and Burn and I’m planning on exploring them further, but lets start with the basics.

Dodging and Burning in Photoshop:  some folks will dodge and burn right on the image.  This is considered “destructive” editing because it changes the actual file.  If there’s just a little bit of work to do, it can be a quick way to get it done.  However, one of the problems with dodging and burning is that you’re essentially drawing black and white lines of varying widths and densities on your image, and these can make larger areas look kinda gray and muddy.  A non-destructive way which is a little more subtle, is to create a separate layer:

1.  Create a New Layer

2.  Fill it with 50% gray:  Hold down the Shift key and hit f5 and the box will appear (another way is to go to Edit, then Fill).  Select 50% Gray from the drop down menu.  Now you can’t see anything but gray.

3.  Set your Blend More to Soft Light or Overlay.  Now you can see your image just as it was before.

4.  Select you Brush tool.  Select a low Density or a low Flow (see below for more info)



5.  Paint on the gray layer using white to lighten, and black to darken.

6.  Dodge and Burn your image.

It’s important to keep your brush tool on either a low density, or a low flow.  By low I mean around 10%.  If you set your density to 10%, then the opacity of your painting will never go above 10%.  If you set your flow to 10%, it means your brush will paint 10% with each pass.  I typically set my Density to about 25%, and my Flow to about 5%.  This means I’ll apply 5% with each stroke, up to a total of 25% but no greater.
 
How to Dodge and Burn an image is too complicated and visual to explain in words.  Do a Youtube search for it.  Keep in mind that you can Dodge and Burn to reduce unwanted shadows, but also to increase shadows and highlights for a more dramatic image.

Thursday, January 16, 2014

Day Four, Learning Four: Skin Softening



I said from the beginning that this blog and my 100 Days of Learning Challenge was going to be specific to what I needed to learn, which is inextricably linked to the equipment I use.  So a little bit about what to expect, and then on to the learning. 

I’m a Nikon shooter.  I have a D600 and use a D7000 as back up. I love ‘em.   I own more lenses than I should, three SB-800 flashes, and a variety of light modifiers.  Maybe I’ll write about equipment later.  On the software/editing side I use Lightroom 3.6 and Photoshop 6.  Probably I should upgrade those....  And I work on a PC.

Which leads me to learning four, which is a technique for skin softening in Photoshop.  There are several ways to soften skin, and they each have advantages and disadvantages that make them more or less useful, depending on the image.  Here’s one way:

1.  Duplicate your image by dragging to the New Layer icon at the bottom or pressing ctrl J (or Command J on a Mac).

2.  On the new, top layer, go to Filter - Blur - Surface Blur.  Name your new layer Surface Blur.  Your Layer Adjustment panel should look like this:



3. Set your Radius between 3 and 5 pixels.

4. Set your Threshold between 14 and 24.  Your Filter box will look like this:
 
Notice how it's overly blurred?  That's fine, because we're not going to apply all of that blur.  So go ahead and--

5. Press Okay

6. Apply a new Layer Mask by holding down the Alt key and clicking on the Layer Mask icon.  This creates a black layer mask.  If your mask is white, you can click on the mask, hold down the Alt, and hit your Backspace key to turn it black.  This hides the surface blur you just applied

7.  Select your paint brush, make sure the color is set to White, and paint over the skin area of your model.  Avoid the edges of the skin, nose, lips, eye lashes, etc.  You want those sharp!  You should be painting white on the black layer mask.  Only the painted areas will have the surface blur applied to them.  Also, it’s best to reduce either the Density of the Flow of the brush in order to have control over the results.  I used a Density of 65 and a Flow of 15.

When it looks the way you want it to, flatten the image and you're done.